Elevating Work Platform (EWP) Over 11m

Students who are deemed competent in the unit of competency will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised. The Statement is issued by Pinnacle Safety and Training (RTO 40496).

National units of competency

• TLILIC0005 Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

Students who successfully complete the Worksafe National Assessment Instrument (NAI) will be eligible to apply for a High Risk Work Licence (HRWL-WP) through Worksafe QLD.

Assessment for this course includes the required assessment to attain both the national unit of competency and the mandatory assessment required to apply for HRWL-EP.

Participants must obtain the required unit of competency before undertaking the National Assessment Instrument (NAI), which eligible participants will undertake on the final day of the course.

Pre-Course Study and Assessment
Participants are required to undertake mandatory pre-course study and complete an online assessment prior to attending the face-to-face course.

National Unit of Competency Assessment
Theoretical knowledge will be assessed through a series of quizzes where participants demonstrate their understanding of relevant legislation, safety procedures, risk control measures, and operating requirements for forklifts. Participants will then undertake a practical assessment involving direct observation of their ability to safely plan, operate, and shut down the forklift in accordance with regulatory and workplace standards.

National Assessment Instrument (NAI) Assessment
The NAI is a nationally recognised assessment tool developed by Safe Work Australia. It covers both theoretical and practical components of forklift operations. This assessment must be completed in English as the mandated assessment conditions do not allow an interpreter to be used during the formal assessment.

This assessment consists of three key components: a theory assessment to evaluate knowledge of safe operating procedures and legislative requirements, a series of calculations to assess load handling and stability, and a practical observation where participants must demonstrate their ability to safely operate an EWP in accordance with workplace and regulatory standards.

Successful completion of all assessment components is required to demonstrate competency and proceed with the HRWL application process.

This course is suitable for both beginners and experienced personnel.

Pre-Course Study and Assessment
To optimise your chance of success, each participant is required to undertake mandatory pre-course study, and complete an online assessment. The link to commence this study will be provided at time of booking.

Age requirements
Participants must be at least 18 years of age. This age requirement is set by Safe Work Australia and enforced by state and territory regulators, and cannot be bypassed, even with parental or guardian consent. Refer to our FAQ for more information.

Language, Literacy and Numeracy skills (LLN)
Participants must have at least a Year 10 level of numeracy, literacy and communication skills and be able to read and write in English. If English is your second language, you must advise us at the time of booking. Contact our Sales and Service Team on 1300 990 810 to determine your eligibility to undertake this training. We will assist you in any way we can, but due to the demands of the regulated assessment process, we cannot guarantee that every applicant will possess the level of LLN required for the assessment.

Evidence of Identification
Participants are required to provide three (3) matching original evidence of identity documents (see this link and read the “What types of evidence do I need to provide?” section above for details). Due to regulatory requirements, participants who attend without this ID will be unable to participate in the course.

Pinnacle Safety and Training supplies all required learning materials and safety equipment for this course.

Recognition of Prior Learning
Pinnacle Safety and Training does not offer Recognition of Prior Learning (RPL) for this course. Due to the duration and cost of this short course, RPL assessment would have limited value to participants.

Credit Transfer

Pinnacle Safety and Training offers Credit Transfers for this training product. A Credit Transfer is granted where the previously attained unit of competency has been achieved. After enrolment, participants are eligible to submit a Credit Transfer application.

It is important to note that while the unit/s of competency are eligible for Credit Transfer, you may be required to resit the training and assessment to meet industry or legislative requirements.

Recognition of Prior Learning
Pinnacle Safety and Training does not offer Recognition of Prior Learning (RPL) for this course. Due to the duration and cost of this short course, RPL assessment would have limited value to participants.

Credit Transfer

Pinnacle Safety and Training offers Credit Transfers for this training product. A Credit Transfer is granted where the previously attained unit of competency has been achieved. After enrolment, participants are eligible to submit a Credit Transfer application.

It is important to note that while the unit/s of competency are eligible for Credit Transfer, you may be required to resit the training and assessment to meet industry or legislative requirements.

A: If you have no prior experience with EWP’s it is highly recommended that you undertake our one-day <11m EWP Program (click here). By doing this, you not only gain your ticket for Scissor Lifts and EWP’s less than 11m, you also gain valuable experience on machines and controls that are very similar to the >11m high-risk machine. If you are inexperienced in the use of EWP above 11m you can still do this course. Your Trainer will work closely with you and provide you with plenty of practical training throughout the course to gain competence. At the conclusion of day two, your Trainer measures your level of competence with a challenge test, which is used to determine your readiness for assessment. If you are ready for assessment an accredited Workplace Health and Safety Queensland (WHSQ) Assessor will conduct the formal assessment on day three. If you are not ready for assessment your Trainer will advise you of the areas of improvement and suggest you work under supervision of a high risk work licence operator and record your EWP experience in a log book (we will provide the logbook). When you have gained more experience and feel confident and competent, please call us to book in for reassessment, and on your assessment day bring your completed logbook. If you are issued with a logbook you must return to conduct the assessment within 12 months.

A: Not everyone passes the first go – don’t be embarrassed if this happens. Even knowledgeable people may struggle to answer the technically specific exam, as the answers need to be provided precisely in accordance with WHSQ standards. If this occurs, you may study the material in your own time, and return within 60 days to re-sit the assessment, at a cost of $198.

A: No. The course fee you paid relates to the formal training you have already received. If you choose not to proceed with this for any reason, no refund or partial-refund will be provided. This is in accordance with our standard Terms and Conditions you accept upon enrolment.

A: Yes. Recent changes now allow interstate residents to apply for a Queensland HRW licence as long as their training and assessment is completed in Queensland by a Queensland-based RTO and accredited assessor.

A: If you are applying for your HRWL in Queensland you will be required to apply online. Before you submit your HRWL application you are required to present three (3) original forms of identification to your Pinnacle Safety Training Assessor on day 1 of your course. If you do not provide the identification requirements you can not participate in the formal assessment.

A: Before you progress to your formal assessment, your Pinnacle Safety and Training Assessor must:

• Provide three (3) matching original evidence of identity documents (see this link and read the “What types of evidence do I need to provide?” section above for details). Please note that arriving without this ID will result in you being turned away from the course.
• NOTE: if you are not a resident of Australia please contact us, prior to booking, to clarify what documents you will require. One of the category A documents must contain a full name, date of birth and be photographic (where the photo is of the person undertaking assessment).

If a person cannot supply three matching evidence of identity documents, they must contact WHSQ for assistance either by telephone Assessor Direct 1300 632 756 or by email to [email protected] before conducting the assessment.